2015 Infiniti Q40 – UpRev calibration

  • 0

2015 Infiniti Q40 – UpRev calibration

Gentleman contacted me since he just picked up this used vehicle and wanted to make sure it was operating correctly since it seemed that it was previously modded.  the first step he did was take it to dealership to replace the oem ecu since it was throwing some codes. Once that was done he brought the car to us to calibrate it.

This 2015 Infiniti Q40 AWD A/T came in with a Stillen Gen3 intakes only, so we installed a UpRev license and started calibrating the vehicle to get a good reliable performance out of it.

After the calibration of this vehicle on this cold night we managed to increase the power output on it to a respectable number for a AWD configuration.

Ambient conditions on the night were: 52F, 39% and 30.17 Baro / all runs were done in sports mode 4th gear.

 


  • 0

Panama Tuning 1/13/17 – ’08 Infiniti G37S

Started the day with a client from the capital driving all the way over to Taller NB in Las Tablas (4hr drive) to get UpRev tuned. The car that we were tuning was a 2008 Infiniti G37S and the mods on the vehicle were:

  • Berk TP
    Exhaust Stillen
    Intake Gen3 Stillen
    ARK exhaust

The previous motor on the motor let go because of a over rev issue that occurred.  A different motor was installed and he wanted to make sure the safety limiters were in place first and foremost.  We even managed to make a little more power and that is always a plus.

G37S1

G37S2

G37S3

G37S4Before and after, so we managed to squeeze a few ponies out of this vehicle on this hot/humid day down here.
Ambient conditions : 90F, 68% humidity, 29.93 Baro

 

Save

Save


  • 0

Panama Tuning 1/13/17 – Infiniti G37S

Got started itn the morning with this 2008 Infiniti G37S M/T.  Client drove from the capital to Las Tablas (4hrs) to get UpRev tuned at Taller NB on our Dyno Dynamics.

Mods on the vehicle:

Berk TP
Exhaust Stillen
Intake Gen3 Stillen
ARK exhaust

Managed to squeeze a little more power out of the vehicle and also made sure the limiters were in place.  The motor let go a while back due to a over rev condition and he wanted to take no chances on this newer motor.

G37S1

G37S2

G37S3

G37S4

Before and after the tune chart.  Ambient conditions during test 90F, 67% humidity, 29.93 baro

Its a G37S and I said the name of the wrong model. DUuHh.  A.R.C. settings enabled on this vehicle, ready for some fun on the track.

Thanks once again to my associates from Taller NB in Las Tablas, Panama.

Save