2007 Honda Accord turbo – KTuner calibration

  • 0

2007 Honda Accord turbo – KTuner calibration

This was rather an interesting project that rather landed in our lap. Client came in asking for a tuning solution for his Honda Accord i4 (K24A8) and he wanted to go the route of KTuner. I said sure I can get that for you and tune it.

The car arrived and then to my knowledge it was going to a automatic transmission vehicle that was fitted a TSX turbo kit on to it.

First I had to call the service of Jay to get us the headers on the ecu soldered since that needed to be done on this model ecu before we can even tune the vehicle.  As usual Jay did a bang up job.

While the board was getting installed in the ecu, the tech was going over some of the things that still needed to be done to the set up in order for it to be truly ready to hit the rollers.
410cc RDX injectors were fitted, KTuned fuel rail was also installed and a few other quirky things that were completed before the calibration could begin.

Ambient conditions on the time of the calibration were: 75F, 72% hum. 30.13baro
Runs were made on D3 setting in the transmission.
boost was of the wastegate spring and it maintained at 9psi
We did not know what it was going to do as this sort of combination was rather odd and not something I had seen before.  KTuner software did well to keep the engine steady and make the power it was going to efficiently make.
Was impressed with a car that makes 160hp to the crank and we managed to make 248whp with the boost that was being thrown at it.

Will post the charts shortly.

  • 0

Nissan 370zTT – Fixing & UpRev calibration

A old client referred this gentleman with the 370zTT to our services. Car came in with the client mentioning that it felt lethargic after he had done a simple oil change in one of those oil service shops.  We loaded the vehicle on the dyno to see what we were up against. The initial dyno test determined that this car was making below normal aspirated power numbers. It was not boosting the right psi and the AFR conditions were dire in the rich side.

After we unstrapped the vehicle from the dyno we were commissioned to take the necessary measures to rectify the situation. Upon quick glance we saw that the previous shop did not do a spot on job on the installing the AAM Competition twin turbo kit.  Our tech came in and wrote down a shopping list of items that would have to be replaced and other adjusted in order to get the turbo kit to operate efficiently.

Many thanks for Luis at AAM Competition for helping us in troubleshooting and getting us the correct parts that needed to be replaced on the kit.

Nissan 2012 370z
A/T built / AAM Competition twin turbo kit / UpRev calibration / Shell 93 oct.

Runs made in sports mode 4th gear.
Ambient conditions 81F / 64% humidity / 30.03 Baro.

All runs were made at the gate pressure which was 9psi.

Dyno Jet comparison mode.

370zTTdyno video